Mastering the L10s Ultra Floor Cleaner: Setup and Usage Guide

Hello, cleaning connoisseur! Let's get your DreameBot L10s Ultra floor cleaner up and running smoothly. Here's a step-by-step guide on how to set up and use the floor cleaner effectively, ensuring a seamless and safe cleaning experience.

Step-by-Step Guide to Using the L10s Ultra Floor Cleaner

1. Preparing the Cleaner Bottle:

• Remove Caps: Start by removing the top and bottom caps of the cleaner bottle to ensure it's ready for use.

2. Accessing the Water Tanks:

• Open Base Station: Open the upper cover of the base station.
• Remove Tanks: Carefully take out both the clean water tank and the used water tank.

3. Installing the Cleaner Bottle:

• Align and Insert: Position the cleaner bottle along the slot and gently slide it into place. The cleaner will be automatically dispensed while the robot is working.

Reference Article:

• For a comprehensive guide, refer to Your Ultimate Guide to the DreameBot L10s Ultra: A Comprehensive User Manual for Seamless Cleaning

Important Notice:

First Use:

• Remove Rubber Plug: Before using the cleaner for the first time, make sure to remove the soft rubber plug in the cleaner adding inlet.

Liquid Safety:

• Approved Cleaner Only: Use only the officially-approved Dreame cleaning fluid to prevent any base station malfunction.
• Avoid Unauthorized Liquids: Do not add any other liquids to the cleaner bottle to avoid potential damage to your robot.

Safety Precautions:

• • Fire and Shock Risk: To reduce the risk of fire and electric shock due to internal component damage, always use Dreame cleaning fluid specifically designed for the DreameBot L10s Ultra.

By following these steps and precautions, you can ensure that your L10s Ultra operates efficiently and safely, providing you with the best possible cleaning results. Enjoy a spotless home with your DreameBot L10s Ultra!