AWD A3 Pro 2500 and application inconveniences and issues

a completely ridiculous application restriction that all zones cannot exceed 2500
it is very inconvenient that adding a new zone is not possible if it has a border with more than one existing zone, I used splitting and merging as a workaround, but as the result I got 2 adjacent zones with a very small abandoned area between these 2 zones, and I cannot merge anymore these two zones
creating a new “no-go” zone requires returning a robot to the station
it is inconvenient that mowing history shows obstacles but these cannot be used to add “no-go” zones
the initial setup cannot be performed using bluetooth, it requires wifi
an alarm is quite useless since a robot can be just turned off without entering PIN and then it can be lifted and carried away
alarming sound itself is too short and not loud enough
when a robot is lifted, it makes sounds like pictures are taken, but app does not show any pictures
if a robot is returning to a station due to low battery and then after continuing with this task, it is performing mowing all the way to the required zone instead of driving to the zone and continuing mowing there
it makes sense to display a grid on the map to make editing more easier

Comments