Hey there! If your robot vacuum is having trouble connecting to Wi-Fi, don't worry! We can help you reset it in a few simple steps. Here's how you can do it:
-
Open the Top Cover: First things first, gently lift the top cover of your robot vacuum. It's usually located on the upper part of the device.
-
Locate the Wi-Fi Indicator LED: Once the cover is open, look for the Wi-Fi indicator LED. It's usually a small light that tells you the Wi-Fi status.
-
Press and Hold the Buttons: Next, you'll need to press and hold both the Spot Clean button and the Dock button simultaneously. Keep holding them down!
-
Listen for the Voice Prompt: While you're holding those buttons, listen for a voice prompt that says, "Waiting for network configuration." This means the robot is ready to reconnect to your Wi-Fi network.
-
Watch for the Wi-Fi Indicator: When you hear the voice prompt, release the buttons. Now, watch the Wi-Fi indicator LED. It should start to flash slowly, indicating that it's in the process of resetting and reconnecting to your Wi-Fi.
-
Set Up Wi-Fi on Your Device: Now, using your smartphone or another device, go to the Wi-Fi settings and look for the robot vacuum's network. Connect to it and follow the on-screen instructions to set up your Wi-Fi network.
-
All Set!: Once you've completed the setup, your robot vacuum should be connected to your Wi-Fi network and ready to go!
And that's it! Your robot vacuum should now be all set with a fresh Wi-Fi connection. If you run into any issues or need further assistance, feel free to reach out. Happy cleaning! 🧹💨