How to Reset the Wi-Fi on Your Robot Vacuum: 📡

Hey there! If your robot vacuum is having trouble connecting to Wi-Fi, don't worry! We can help you reset it in a few simple steps. Here's how you can do it:

1. Open the Top Cover: First things first, gently lift the top cover of your robot vacuum. It's usually located on the upper part of the device.

2. Locate the Wi-Fi Indicator LED: Once the cover is open, look for the Wi-Fi indicator LED. It's usually a small light that tells you the Wi-Fi status.

3. Press and Hold the Buttons: Next, you'll need to press and hold both the Spot Clean button and the Dock button simultaneously. Keep holding them down!

4. Listen for the Voice Prompt: While you're holding those buttons, listen for a voice prompt that says, "Waiting for network configuration." This means the robot is ready to reconnect to your Wi-Fi network.

5. Watch for the Wi-Fi Indicator: When you hear the voice prompt, release the buttons. Now, watch the Wi-Fi indicator LED. It should start to flash slowly, indicating that it's in the process of resetting and reconnecting to your Wi-Fi.

6. Set Up Wi-Fi on Your Device: Now, using your smartphone or another device, go to the Wi-Fi settings and look for the robot vacuum's network. Connect to it and follow the on-screen instructions to set up your Wi-Fi network.

7. All Set!: Once you've completed the setup, your robot vacuum should be connected to your Wi-Fi network and ready to go!

And that's it! Your robot vacuum should now be all set with a fresh Wi-Fi connection. If you run into any issues or need further assistance, feel free to reach out. Happy cleaning! 🧹💨