Experiencing water leaks from your H12 Pro Scrubber Dryer can be a frustrating issue, but there are several common causes and solutions to address this problem:
1️⃣ **Drying the Filter**:
- After cleaning, it's crucial to ensure that the filter is thoroughly dried. A wet filter can lead to water seeping from the dirty water tank.
2️⃣ **Avoiding Impacts**:
- If your robot bumps into the corners of tables or walls, it can cause the water in the dirty tank to slosh, potentially leading to leaks. Ensure your robot has enough space to maneuver without hitting obstacles.
3️⃣ **Avoiding Rough Handling**:
- Pulling the robot back and forth with force can cause the water in the dirty tank to vibrate excessively, which may lead to leaks. Handle your H12 Pro with care to prevent this issue.
4️⃣ **Correcting the Use Angle**:
- Using the robot at a low angle can cause sewage to enter the motor, which is not only harmful to the machine but can lead to leaks. Always use the robot at the recommended angle to avoid this problem.
🔧 **Inspecting the Seal**:
- Check the seals around the dirty water tank for any damage or wear that might be causing the leaks.
🔧 **Conclusion**:
- Water leaks from your H12 Pro's dirty water tank can be resolved by following these steps. Regular maintenance and careful handling are key to preventing leaks and ensuring your scrubber dryer's longevity.