If your H12 Pro machine is indicating a pipe blockage, it's time to take action. Here's a straightforward guide to help you get things flowing smoothly again:
💧 **Check the Cleaning Liquid**:
- Sometimes, too much cleaning liquid can cause blockages. It's recommended to add just 10ml of cleaning liquid to a full water tank for optimal performance.
🚿 **Remove and Clean**:
- Take off the sewage tank and roller brush. Use a wet rag to wipe down the inlet and the pipe, removing any dirt that might be causing the blockage.
🔍 **Inspect the Sewage Tank Pipe**:
- Check the sewage tank pipe for any blockages. If you find one, it's crucial to clean it out to restore proper flow.
🧼 **Clean the Cartridge**:
- Remove the cartridge from the top of the sewage tank. Rinse it with water, make sure it's completely dry before placing it back into the machine. Remember, a wet cartridge should not be used as it can affect performance.
💡 **Conclusion**:
- A clogged pipe can be a hassle, but with these steps, you can clear the blockage and get your scrubber dryer back to work efficiently.