1. Please make sure your phone's Bluetooth is on and get as close as possible to the mower while opening the APP. Tap on "Scan QR Code" in the APP and enter the QR code scanning interface.
2. Scan the QR code on the inside of the mower's top protective cover, click on "Start network configuration" in the APP, or you can also manually select the A1 through the APP.
3. Hold the knob on the control panel for 3 seconds, after hearing "enter Bluetooth pairing mode," click on "Start pairing" in the APP, and enter the PIN code you previously set for the A1 for verification.
4. After a successful Bluetooth pairing, set up the Wi-Fi connection on the APP. Please ensure that the A1 and your phone are on the same Wi-Fi network.
5. Enter the Wi-Fi username and password following the APP’s guide and click on "Next." The APP will proceed with the automatic Wi-Fi connection.
6. Once connected successfully, the APP interface will display your A1 device icon, and the A1 control panel screen will show the Wi-Fi icon as continuously lit.
Warm Tip: The robot only supports 2.4G networks or 2.4G & 5G combined networks.
How to connect the Dreame A1 with the APP and set up the network?
