Why's My Robot Doing the Circle Dance?

Let's Get to the Bottom of This!

1. Let's Check Those Main Wheels:

   • First, give your robot a break and flip it over.
   • Give the main wheels a gentle squeeze and see if anything's caught in there.
   • If you spot any uninvited guests (like hair or lint), give them the boot and spin those wheels by hand to make sure they're rolling smoothly.

2. Find a New Spot and Hit Restart:

   • Give your robot some elbow room and hit the restart button.
   • Keep an eye out for super bright lights or dark floors – they can throw your robot off its game.

3. The LDS Sensor Needs a Look:

   • Make sure the LDS Sensor, that little spinning top on your robot, is doing its thing without a hitch.
   • If it's looking a bit dusty, give it a quick clean (unless you've got an F9 model – it's got a different setup).

4. A Fresh Start Can Work Wonders:

   • Sometimes, all it takes is a simple restart to get things moving in the right direction.

5. The Factory Reset: A Last Resort:

   • If all else fails, it's time for the big guns – the factory reset.
   • Open up the top cover and find that reset button.
   • Hold it down for a good 3 seconds, and your robot will be back to its factory settings.
   • Give it another restart and see if the circle dance is over.

If the Circle Dance Isn't Over Yet:

• Don't worry! We're here to help. Reach out to our aftersales customer service, and we'll get your robot back to its best behavior.

Remember, every step is designed to be easy and straightforward. If you need a hand or have any questions, we're just a message away!