Introduction
This document provides detailed step-by-step instructions for packaging the Dreametech Robot Vacuum and Mop. Please follow each step carefully to ensure safe and secure packaging according to standard operating procedures (SOP).
Step 1: Prepare a cardboard box and place cushioning materials at the bottom, such as paper cards, old newspapers, foam pellets, small boxes, small water bottles, and other fillers to secure the machine.
Step 2: Place the removed extension board along with the cleaned liquid box and the dust collection valve in the yellow board box.
Step 3: Wrap the main unit with a towel or clothing, and place it in the yellow board box with the front facing up and the wheels facing out, as shown in the picture below.
Step 4: Fill the surrounding area of the base station with clothing, old towels, inflatable bags, or similar cushioning materials.
Step 5: Take the "bottom" of the yellow board box and fold it according to the instructions in the picture, sealing the box in a "工" (work) shape.
Step 6: Seal the box as shown in the picture.
Notes
1. Begin the current station's tasks after verifying that the previous station's work is correct.
2. After completing the tasks, perform a self-inspection of all work contents according to SOP requirements before passing to the next station.
Important Notice – Packaging and Shipping Disclaimer