Resolving Dirty water tank unable to pump water / Base station washboard water level abnormality

Troubleshooting About Dirty water tank unable to pump water / Base station washboard water level abnormality

Step 1: Check Sewage Filter and Sewage Pipe

• Look for any blockages in the sewage filter and the pipe connected to the floor drain. Give both components a thorough cleaning to remove any visible blockages or debris. Make sure the pipe is clear and flowing freely.

Step 2: Inspect the Sealing Cover of the Sewage Tank

• Ensure the sewage tank is properly sealed. Check the sealing cover to make sure it's securely fastened and correctly positioned. If it's loose or misaligned, adjust it to ensure a tight seal.

Step 3: Clean the Cleaning Tray

• Remove and inspect the cleaning tray by opening the left and right buckles and gently taking it out. Empty any remaining water and check the tray's filter for blockages. Clean the filter under running water or follow the manufacturer's instructions.

Step 4: Clean the Overflow Sensor

• Keep the overflow sensor clean. Find the overflow sensor (usually a metal piece) and gently wipe it with a dry cloth to remove any dust or debris. After cleaning, reattach the cleaning tray and secure the left and right buckles.

Step 5: Clean the Mop

• Remove the mop cloth from the robot vacuum and wash it according to the manufacturer's instructions to ensure it's free from dirt and debris. Once it's dry, reattach the cleaned mop to the robot.

By following these steps, you should be able to resolve any issues with your X40 Master's sewage tank or abnormal water levels in the cleaning pan. If the problems persist, consider reaching out to customer support for further assistance.

Happy troubleshooting! With these tips, your X40 Master should be back to its cleaning best in no time. 🧼💧