Top Water Tank Cover Leaking? Here's What to Do!

Hello, water-wise cleaner! 💧🛠️

What to Do If Your Water Tank's Top Cover Is Leaking:

A leaky water tank can be a bit of a dampener (pun intended) for your cleaning routine. Here's how to address the issue:

1. Understand the Vent Hole:

   • The top cover of your water tank has a vent hole that helps balance the air pressure inside and outside the tank. This is normal and necessary for the tank to function properly.

2. Check the Water Level:

   • After filling your water tank, make sure it's level during installation. Overfilling or an uneven fill can cause water to spill when the tank is in use.

3. Handle with Care:

   • Slight leakage can occur if the water tank is tilted during removal or installation. Be gentle and ensure the tank is properly aligned when you put it back.

Steps to Fix a Leaking Water Tank Top Cover:

• Empty the Tank: Before you start, empty the water tank to avoid making a mess.
• Inspect the Seal: Check the seal around the vent hole and the edges of the cover for any damage or debris that might be causing the leak.
• Clean the Area: Make sure the area around the vent hole and the edges is clean and dry.
• Realign the Cover: Ensure the cover is properly aligned and seated correctly on the tank.
• Test for Leaks: After reinstallation, fill the tank to the correct level and test for leaks.

Preventive Tips:

• Proper Installation: Always install the water tank according to the manufacturer's instructions.
• Avoid Overfilling: Never overfill the tank, as this can cause leaks.
• Storage: Store the water tank upright and avoid tilting it when not in use.

Need More Help?

If you've tried these steps and your water tank is still leaking, don't hesitate to reach out to our customer service team. They're here to help you get your robot vacuum's water tank back in tip-top shape.

Remember, a little care goes a long way in keeping your cleaning equipment in top condition. Happy cleaning! 🌟🧹